BZMYN - KODAK FLEXICOLOR BLEACH III REPLENISHER, PART B

  • MSDS: BZMYN
  • Manufacturer: EASTMAN KODAK COMPANY
  • Product Name: KODAK FLEXICOLOR BLEACH III REPLENISHER, PART B
  • National Stock Number: 6750-00D004514
Product Identification

Product ID:KODAK FLEXICOLOR BLEACH III REPLENISHER, PART B
MSDS Date:10/12/1994
FSC:6750
NIIN:00D004514
Kit Part:Y
MSDS Number: BZMYN

Responsible Party
EASTMAN KODAK COMPANY
343 STATE STREET
ROCHESTER, NY 14650
US

Emergency Phone: 716-722-5151

Info Phone: 800- 242-2424

Cage: 19139

Contractor
EASTMAN KODAK CO GOVERNMENT MARKETS CONTRACTS
ROCHESTER, NY 14650-1115 US

Telephone: 716-722-5151/(800) 242-2424

Cage: 19139

Ingredients

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 75-80%


AMMONIUM FERRIC PROPYLENEDIAMINETETRAACETIC ACID

CAS: 111687-36-6

Fraction By Weight: 5-10%


AMMONIUM NITRATE

CAS: 6484-52-2

RTECS: BR9050000

Fraction By Weight: 7%


ACETIC ACID (CERCLA)

CAS: 64-19-7

RTECS: AF1225000

Fraction By Weight: 1-5%

OSHA PEL 10 PPM

ACGIH TLV: 10 PPM/15 STEL; 9596

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


AMMONIUM ACETATE (CERCLA)

CAS: 631-61-8

RTECS: AF3675000

Fraction By Weight: <1%

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: EXPECTED TO BE A LOW
HAZARD FOR RECOMMENDED HANDLING. VAPOR MAY BE IRRITATING. EYES: NO
SPECIFIC HAZARD KNOWN. MAY CAUSE TRANSIENT IRRITATION. SKIN: LOW
HAZARD FOR RECOMMENDED HANDLING. IN GESTION: EXPECTED TO BE A LOW
INGESTIONHAZARD.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHALATION-IF SYMPTOMATIC, MOVE TO FRESH AIR. GET MEDICAL
ATTENTION IF SYMPTOMS PERSIST. EYES-ANY MATERIAL THAT CONTACTS THE
EYE SHOULD BE WASHED OUT IMMEDIATELY WITH WATER. GET MEDICAL
ATTENTION IF S YMPTOMS OCCUR. SKIN-WASH WITH SOAP & WATER. GET
MEDICAL ATTENTION IF SYMPTOMS OCCUR. INGESTION-DRINK ONE OR TWO
GLASSES OF WATER. SEEK MEDICAL ATTENTION.

Fire Fighting

Flash Point:NONE
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, DRY CHEMICAL, ALCOHOL
FOAM.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING. FIRE OR EXCESSIVE HEAT MAY PRODUCE HAZARDOUS
DECOMPOSITION PRODUCTS.
Unusual Fire/Explosion Hazard:FIRE OR HIGH TEMPERATURE MAY CAUSE
DECOMPOSITION. SOLUTION CONTAINS A STRONG OXIDIZER. DRIED PRODUCT
RESIDUE CAN ACT AS AN OXIDIZER.

Accidental Release

Spill Release Procedures:FLUSH TO SEWER WITH LARGE AMOUNTS OF WATER.
OTHERWISE, ABSORB SPILL WITH VERMICULITE OR OTHER INERT MATERIAL,
THEN PLACE IN A CONTAINER FOR CHEMICAL WASTE. CLEAN SURFACE
THOROUGHLY TO REMOVE RESIDUAL CONTAMINATION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE OR SHIP TOGETHER WITH
COMBUSTIBLE MATERIALS. STORE IN ORIGINAL CONTAINER. KEEP CONTAINER
TIGHTLY CLOSED TO PREVENT LOSS OF WATER.
Other Precautions:KEEP AWAY FROM INCOMPATIBLE SUBSTANCES. USE WITH
ADEQUATE VENTILATION. WASH THOROUGHLY AFTER HANDLING. KEEP FROM
CONTACT WITH OXIDIZING MATERIALS.

Exposure Controls

Respiratory Protection:NONE SHOULD BE NEEDED. A FULL-FACE POSITIVE
PRESSURE AIR-SUPPLIED RESPIRATOR MUST BE WORN IF HAZARDOUS
DECOMPOSITION PRODUCTS ARE LIKELY TO BE RELEASED.
Ventilation:GOOD GENERAL VENTILATION (TYPICALLY 10 AIR CHANGES/HR)
SHOULD BE USED. VENTILATION RATES SHOULD BE MATCHED TO CONDITIONS
Protective Gloves:IMPERVIOUS GLOVES SHOULD BE WORN.
Eye Protection:WEAR SAFETY GLASSES WITH SIDE SHIELD.
Other Protective Equipment:EYE BATH, SAFETY SHOWER, WASHING FACILITIES.
Work Hygienic Practices:GOOD INDUSTRIAL HYGIENE PRACTICES SHOULD BE
FOLLOWED WHICH INCLUDE PREVENT EYE CONTACT & MINIMIZING SKIN
CONTACT/INHALE.
Supplemental Safety and Health
IF RESPIRATORS ARE USED, APROGRAM SHOULD BE INSTITUTED TO ASSURE
COMPLIANCE WITH OSHA STANDARD 29 CFR 1910.134.

Chemical Properties

HCC:V7
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:18 MMHG
Vapor Density:0.6
Spec Gravity:1.07
pH:3.6
Solubility in Water:COMPLETE
Appearance and Odor:LIQUID, GREEN, VINEGAR ODOR.
Percent Volatiles by Volume:75-80

Stability

Stability Indicator/Materials to Avoid:YES
BASES, SODIUM HYPOCHLORITE, STRONG OXIDIZING AGENTS, COMBUSTIBLE
MATERIAL, STRONG REDUCING AGENTS.
Stability Condition to Avoid:STABLE; HOWEVER, MATERIAL CAN DECOMPOSE
ABOVE 215C. AVOID TEMPERATURES ABOVE 115C.
Hazardous Decomposition Products:AMMONIA, CHLORAMINE. CARBON MONOXIDE,
CARBON DIOXIDE, OXIDES OF NITROGEN.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Disposal

Waste Disposal Methods:DISCHARGE, TREATMENT, OR DISPOSAL MAY BE SUBJECT
TO NATIONAL, STATE, OR LOCAL LAWS. FLUSH TO SEWER WITH LARGE
AMOUNTS OF WATER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.